2026 ISO-NE Peak Load Hour and CES Self-Help Program Recap

competitive-energy-services-2026-Peak-Load-Hour

By Andrew Price, President & CEO

There is an old adage that New England has two seasons: winter and the Fourth of July. That rang particularly true this year, as the region’s hottest weather arrived just ahead of the holiday weekend. Temperatures exceeded 95 degrees across much of New England on Thursday, July 2.

Surging air conditioning load pushed electricity demand over 25,300 MW and, for the second year in a row, predicting the peak load hour was relatively easy. ISO-NE’s preliminary data identifies the 6:00 to 7:00 PM hour on July 2 as the 2026 annual system peak, with load at 25,303 MW. CES issued just 4 Self-Help notifications this year, all targeting July 2.

July 2 Is the Preliminary 2026 Peak

The following chart shows ISO-NE’s annual peak loads since 2019. At 25,303 MW, the 2026 peak was the second-highest annual peak since 2019.

As we note each year, ISO-NE’s preliminary peak load data is subject to revision as additional data becomes available. This uncertainty is one reason that CES Self-Help notices typically recommend a curtailment window spanning several hours. Our recommendation to participants for July 2 was to curtail loads starting at 4:00 PM continuing until 8:00 PM.

In addition to after-the-fact adjustments from ISO-NE, other factors make it difficult to predict the peak load hour with precision. These factors include: the influence of hundreds of individual companies responding (or not responding) to load curtailment notices throughout the region; the location and timing of summer thunderstorms; and the impact of the rapidly growing number of behind-the-meter solar PV facilities during late afternoon hours when solar PV generation falls off quickly.

A new factor to take into consideration is the rapid growth of battery storage systems. Both grid-scale and smaller distributed battery storage systems are being installed throughout the region. Batteries can help “flatten” annual and monthly demand peaks by shifting electricity consumption from high-demand periods to lower-demand periods. The region has around 1,000 MW of operational battery systems today, but this is expected to double to ~2,000 MW by 2030. Battery capacity will increasingly influence the peak load and the timing of when the peak load occurs.

As a reminder, the timing of the peak load is important as the ISO-NE assigns every retail electricity account in New England a capacity tag based on its load during the hour of annual peak the prior year. The capacity tag is the contribution of each electric utility account to overall system demand during the single annual hour of peak load. This value (measured in MW) divided by the total load in New England during that hour represents that account’s share of the roughly $1 to $2 billion in capacity payments ISO-NE makes each year to the region’s electricity generators. If you can predict the hour when the annual system peak occurs, and are able to reduce your load that hour, you will have a smaller capacity tag and therefore be responsible for a smaller share of the total amount paid to generators. This is taken into consideration by electricity suppliers in quoting prices to serve your account, so a lower capacity tag will result in lower electricity costs next year.

The Capacity Market Is Changing

Account level capacity tags set during calendar 2026 will be used to determine your capacity costs during the power year running June 2027 through May 2028. The capacity market in New England will work the same in 2027 but changes are coming to the New England capacity market, starting June 2028. Changes will include a transition away from using a single peak hour to a system that considers both winter and summer peak hours. This change is being made as winter peak loads are expected to grow in New England.  As heating and transportation become increasingly electrified, the ISO-NE CELT forecasts shows winter and summer peak demand converging by the mid-2030s, making winter system conditions increasingly important to regional capacity needs.

Winter peaks are expected to occur in the morning, as homes and businesses turn up the heat from overnight setbacks and before solar PV has ramped to full capacity.  Summer peaks are still expected to occur in the late afternoon, as air conditioners deal with the heat from the day and solar PV is ramping down.

Additional changes are expected to impact the capacity value that generators are assigned based on their probability of generating at a given capacity level during system peak hours. Generators using natural gas, oil, solar, wind and hydro may all be assigned different capacity values starting in 2028. Other regions of the U.S. have undertaken similar changes to regional capacity programs and experienced dramatic increases in capacity prices. We expect capacity prices to increase because of the changes being contemplated, perhaps significantly, from current levels.

For CES clients participating in our ISO-NE Self-Help program, we encourage you to think about how you might reduce load during winter peak hours in addition to the traditional summer peak hour. If upcoming changes increase the cost of capacity, as expected, the value of managing load during annual system peak(s) will grow in direct proportion.

The CES Self-Help program is voluntary and provided at no cost to our clients. There is never any obligation to respond to our notifications and, if you can respond during the hour of the ISO-NE system peak, 100% of any savings are yours to keep. To enroll, update your participation, or provide any feedback contact your CES Energy Services Advisor or Nina Callanan at ncallanan@competitive-energy.com.

Photo by: Jaroslaw Kwoczala